Description
The CF 6846 GB (formerly DBF-1521G4S) sits at the very top-end our premium 15 mm plunger pumps for direct-drive gas engines. This pump's manifold is made out of stainless-steel allowing it to reach higher pressures (up to 6,800 psi) than brass manifolds. With a gearbox effectively halving the RPM coming out of the engine, pump life is extended significantly.
- Pressure: 6800 psi (480 bar)
- Flow rate: 4.6 US gpm (17.4 L/min)
- Power: 24 hp
- RPM: Gearbox reduction 3,400–1,560 rpm
- Pump mechanism: Triplex plunger
- Inlet: ¾″ F
- Outlet: ⅜″ F
- Oil grade: SAE 15W-40 oil
- Compatibility: Standard G2 mounting flange for up to 24 hp direct-drive gasoline engines with 1″ horizontal shafts
- Includes: Pressure gauge
*The flange should be flush to engine when fully seated to avoid damage while tightening bolts. If not flush when fully seated on shaft, then spacers are required.
