Description
These gearboxes work with select Canpump high pressure pumps with 24mm shaft and machined shaft plates.
Reduction Ratio: 1:2.18
Engine Shaft: 1″
Pump Shaft: 24mm
Fits to Engine: 9-33 HP
Oil Type: SAE 90/80W90
Caution: For correct use check the rotation speed of the engine and never exceed the max RPM rate indicated on the pump.
*The flange should be flush to engine when fully seated to avoid damage while tightening bolts. If not flush when fully seated on shaft, then spacers are required.
