Description
NOTE: This product ships by freight and is only available to ship within the contiguous US and Canada.
This pressure washer combines a Canpump 5 hp solid shaft half-speed electric motor with Canpump's own hollow shaft triplex pump. It provides the power you need for industrial cleaning maintenance and general-purpose cleaning.
The wireless control-based Total Stop System (TSS) automatically shuts off the pump when the trigger is not engaged, saving energy and prolonging the life of the pump. It uses a battery-operated trigger gun that sends a wireless signal to the module to control the machine based on the trigger position.
- Includes an electric motor, pump, detachable unloader valve (pressure regulator), wall mount bracket, wireless control spray gun, wand, control box, 50 ft hose and a set of 5 nozzles
- Commercial-grade pump and motor fully serviceable through our line of spare parts and repair kit
- Durable twist resistant wire-braided hose with quick connectors for easy assembly and transport
Power source: Single-Phase
Power: 5 hp (3.7 kW)
Speed: 1,740 rpm
Voltage: 240 V
Current: 21 amp
Frequency: 60 Hz
Protection: IP55
Shaft: 1⅛″ shaft with NEMA 184T flange
Gun: Quick-connect (includes battery and built-in sensor on wireless control variant)
Nozzles: 5 quick-connect nozzles (Size 050)
Pump specs
Canpump CE 1550 E
Pump mechanism: Triplex plunger
Unloader valve: Detachable (bolt-on) unloader valve, pressure-adjustable with 20:1 detergent injector and built-in water filter
Inlet: ¾″ standard garden hose
Outlet: ⅜" Quick-connect
Includes: Detergent tube with strainer and operating manual with spare parts list
Oil grade: SAE 15W-40 oil
Compatibility: Direct-drive electric motors conforming to NEMA 182T or 184T standards (1⅛″ shafts)
Pressure: 1500 psi (105 bar)
Flow rate: 4.9 US gpm (18.5 L/min)
RPM: Half speed
Ships in 2 boxes, some assembly required. Does not come with a 230 V plug.
CLICK HERE TO VISIT INSTALLATION INSTRUCTIONS
